1. Ud Din S, Sajid M, Saeed A, Chaudhary FA, Alam MK, Sarfraz J, et al. Dimensional changes of commercial and novel polyvinyl siloxane impression materials following sodium hypochlorite disinfection. PeerJ 2022;10:e12812. [ DOI:10.7717/peerj.12812] [ PMID] [ ] 2. Martins F, Reis J, Barbero Navarro I, Maurício P. Dimensional Stability of a Preliminary Vinyl Polysiloxane Impression Material. Dent J (Basel) 2019;7(3). [ DOI:10.3390/dj7030081] [ PMID] [ ] 3. Ronald Sakaguchi R, Ferracane J, Powers J. Restorative dental materials 14 ed: St. Louis: Mosby; 2019. p: 4. Rose S, Aravindakshan S, Mohamed Usman JA, Mohamed R, Menon S, Shafiullah RS, et al. Comparative Evaluation of Surface Detail Reproduction and Dimensional Stability of Poly Ether, Vinyl Siloxane, and Vinyl Siloxane Ether Impression Materials: An In vitro Study. J Pharm Bioallied Sci 2021;13(Suppl 1):S851-s6. [ DOI:10.4103/jpbs.JPBS_819_20] [ PMID] [ ] 5. Aalaei S, Rezaei Adli A, Mansoorali MR, Gholami F. Dimensional stability of two polyvinyl siloxane impression materials in different time intervals. J Dent Biomater 2015;2(4):155-61. 6. Kambhampati S, Subhash V, Vijay C, Das A. Effect of temperature changes on the dimensional stability of elastomeric impression materials. J Int Oral Health 2014;6(1):12-9. 7. Asopa SJ, Padiyar UN, Verma S, Suri P, Somayaji NS, Radhakrishnan IC. Effect of heat sterilization and chemical method of sterilization on the polyvinyl siloxane impression material. A comparative study. J Family Med Prim Care 2020;9(3):1348-53. [ DOI:10.4103/jfmpc.jfmpc_1122_19] [ PMID] [ ] 8. Martins F, Branco P, Reis J, Barbero Navarro I, Maurício P. Dimensional stability of two impression materials after a 6-month storage period. Acta Biomater Odontol Scand 2017;3(1):84-91. [ DOI:10.1080/23337931.2017.1401933] [ PMID] [ ] 9. Aslan YU, Ozkan Y. Comparing volumetric dimensional stability and accuracy of newly formulated polyvinyl siloxanether, polyvinyl siloxane and polyether impression materials using micro-computed tomography. Clinical and Experimental Health Sciences 2019;9(2):94-100. [ DOI:10.33808/clinexphealthsci.474861] 10. Savita Chakote M, Ramesh Chowdhary M, Srinivas Rao M. Evaluation of the Effect of Temperature Changes on the Dimensional Stability of poly (Vinyl Siloxane) Impression Material. IOSR-JDMS 2017;16(12):10-5. 11. Kinra M, Alghatam H, Al Bin AA, Sharanesha R, Khatri P, Sharma A. To Evaluate the Effect of Storage Temperature on the Linear Dimensional Accuracy of Delayed and Repeat Pours of Two Addition Silicone Impression Materials. Indian J Dent Sci 2020;12(1):7-15. [ DOI:10.4103/IJDS.IJDS_47_19] 12. Thomas W, Kumar P, Mathew S, Sarathchandran S, Jayanthi P. Effect of storage time and temperature change on the dimensional stability of polyvinyl siloxane and polyether impression materials: An in vitro study. J NTR Univ Health Sci 2016;5(3):204-9. [ DOI:10.4103/2277-8632.191848] 13. Kumar S, Yadav D, Yadav R, Arora A. A comparative evaluation of tray spacer thickness and repeat pour on the accuracy of monophasic polyvinyl siloxane impression material: In vitro study. Indian Journal of Dental Research 2014;25(2):184. [ DOI:10.4103/0970-9290.135916] [ PMID] 14. Dugal R, Railkar B, Musani S. Comparative evaluation of dimensional accuracy of different polyvinyl siloxane putty-wash impression techniques-in vitro study. J Int Oral Health 2013;5(5):85-94. 15. Almeida CF, Dantas F, Portela A, Vasconcelos M, Campos JR. Influence of temperature on the dimensional stability of an addition silicone. Biodental Engineering V: CRC Press; 2019. p. 11-4. [ DOI:10.1201/9780429265297-3] [ ] 16. Mehrabanjahromi S, Yeganeh T, Atashrazm P, Mobayeni MR, Tamizi M, Nematollahi F. Comparing the effect of storage time on dimensional changes of two alginate impression materials (golchay & bayer). J Res Dent Sci 2014;11(3 (41)):1-10. 17. Standard I. Dentistry - Elastomeric impression materials ISO 4823:2015. 2015. p. 39. 18. Gonçalves FS, Popoff DA, Castro CD, Silva GC, Magalhães CS, Moreira AN. Dimensional stability of elastomeric impression materials: a critical review of the literature. Eur J Prosthodont Restor Dent 2011;19(4):163-6. 19. Pereira JR, Murata KY, Valle AL, Ghizoni JS, Shiratori FK. Linear dimensional changes in plaster die models using different elastomeric materials. Braz Oral Res 2010;24(3):336-41. [ DOI:10.1590/S1806-83242010000300013] [ PMID] 20. Maria GGAV, Sanette MS. The effect of temperature on linear dimensional stability of elastomers. J Res Dent 2014;2(1):6-13. [ DOI:10.4103/2321-4619.129005] 21. San SP, Win TN, Aung T, Lin AZ, Aung S, Aung KH, et al. Effect of impression technique and material on accuracy of implant impressions. JCDRR 2020;1(1):44-51.
|