journal of research in dental sciences
مجله تحقیق در علوم دندانپزشکی
J Res Dent Sci
Medical Sciences
http://jrds.ir
1
admin
2008-4676
2228-7353
8
10.61186/jrds
14
13
fa
jalali
1392
10
1
gregorian
2014
1
1
10
4
online
1
fulltext
fa
تاثیر تغییر موقعیت مندیبل برروی قابلیت اطمینان و تجدیدپذیری اندازهگیریهای خطی در تصاویر CBCT
Effect of Mandible Orientation on Reliability and Reproducibility of Linear Measurements Using Cone-Beam Computed Tomography
جراحی-
oral surgery
مطالعه اصیل
original article
<p align="right">خلاصه : </p><p align="right"> <strong>سابقه و هدف:</strong> دقت ابعادی تصاویر CBCT پیش نیاز مطمئن در درمانهای ایمپلنتهای دندانی است. هدف پژوهش حاضر تعیین تاثیر تغییر موقعیت مندیبل بر روی دقت اندازهگیریهای خطی روی تصاویر CBCT می باشد. </p><p align="right"> <strong> مواد و روشها: </strong>در این مطالعه تجربی 12 فاصله خطی روی یک مندیبل خشک به وسیله کولیس دیجیتال سه مرتبه توسط دو مشاهده گر اندازه گیری شد. سپس مندیبل توسط دستگاه ( CBCTscanora 3D ) در پنج حالت اسکن شد: موازی افق، تمایل به پایین، به بالا، تمایل لترالی و حالت چرخیده. فواصل خطی روی هر یک از تصاویر در حالات مختلف توسط دو مشاهده گر در دو زمان(در هر نوبت سه بار) اندازهگیری شد. خطای زیر 10 درصد طبق مرجع به عنوان حاشیه امن تلقی شد. سپس توسط نرم افزار تمایلهای اعمالی اصلاح و اندازه گیریها تکرار گشت. آزمون T زوجی و همبستگی پیرسون برای آنالیز آماری استفاده شد. <strong></strong></p><p align="right"> <strong> یافتهها: </strong>4/88 درصد اندازه گیریهای روی تصاویر کوچکتر از اندازهگیریهای انجام شده روی مندیبل بود. میزان اختلاف برای تمایلهای مختلف بین 01/0 ± 65/2 میلی متر بدست آمد. اندازهگیریها (به جز شش مورد) خطای زیر 10 درصد داشتند که در حاشیه امن بود. پس از اصلاح تمایلها، خطای بیش از یک میلیمتر تنها در یک مورد مشاهده شد و درصد خطا از 8 درصد تجاوز نمیکرد. از نظر تکرارپذیری، همبستگی بالا بین مشاهده گرها و نیز بین دو بار خوانش یک مشاهدهگر بدست آمد. <br>( 9/0 r> ) <strong></strong></p><p align="right"> <strong> نتیجه گیری </strong>: به نظر می رسد در CBCT چرخش سر به اندازه CT پزشکی اهمیت ندارد خصوصاً اگر چرخشها قبل از اندازه گیری با نرم افزار اصلاح شود. <strong></strong></p><p align="right"> </p>
<p align="left"> <strong> </strong></p><p align="left"> <strong> Abstract: </strong></p><p align="left"> <strong> </strong></p><p align="left"> <strong> Background and Aim: </strong>The aim of the present study was to assess the effect of mandibular inclination on accuracy of linear measurements performed on CBCT scans.<strong></strong> </p><p align="left"> <strong> Materials and Methods </strong>: In this descriptive analytical study, 12 linear dimensions between anatomical landmarks were measured on a dried human mandible. The measurements were obtained with a digital caliper three times by two observers. The mandible was scanned using a cone-beam CT(scanora 3D) with the base of mandible positioned in 5 different inclinations: horizontal, tilted downwards, tilted upwards, laterally tilted and rotated. Computer measurements of the dimensions were obtained twice by two observers, three times at each session. Then, the inclinations were corrected by the software and all the measurements were repeated. Paired T-test and Pearson correlation test were used to analyze the data. <strong></strong></p><p align="left"> <strong> Results </strong>: In 88.4% of the samples, the mean computer measurements were smaller than the mean manual caliper measurements. The mean difference was 0.01-2.65 mm for different inclinations. The percentage error was below 10% (except for 6 cases) which is considered to be the safe margin in studies. Following correction of the inclinations, the mean absolute error exceeding 1 mm was observed in only one case and the percentage error was less than 8%. Regarding the reproducibility high inter and intra examiner correlation was observed(r>0.9). High inter and intra examiner correlation was observed with respect to the reproducibility of the results(r>0.9).<strong></strong> </p><p align="left"> <strong> Conclusion: </strong>Head orientation during CBCT scanning is not as crucial as in CT scan especially when the inclinations are corrected via software before the measurements. <strong></strong></p><p align="left"> </p>
تصویر برداری با اشعه مخروطی، دقت اندازهگیری ابعادی، تصویر برداری سه بعدی
Cone-Beam Computed Tomography, Dimensional Measurement Accuracy,Image,Three Dimensional
218
227
http://jrds.ir/browse.php?a_code=A-10-736-1&slc_lang=fa&sid=1
R
Ghaffari
روشنک
غفاری
10031947532846005488
10031947532846005488
No
M
Mokhtari
میترا
مختاری
mitmokhtari@gmail.com
10031947532846005489
10031947532846005489
Yes